1. Initial setting for GPS Tracker devices
1.1 Send an SMS message containing the IP ( DNS ) and Port Settings command to the SIM phone number contained in the GPS Tracker as in the following example.
For other models of GPS Tracker, you can check the GPS Tracker's manual to determine which command to use to determine the IP and Port. And you can check the port of the GPS Tracker which port to use. By looking at the information from the table in the link below
1.2 When receiving an SMS message from the device saying "OK", it means that the connection can be successfully set to the server. But is it correct? Must follow item 2 below to add equipment and check first
2. Adding a GPS Tracker device to the server
2.1 Check the ID number on the GPS Tracker (example) as shown below.
2.3 On the Log in screen, select the registration button (1) and enter your name (2), email (3) and password (4) and click the save file button (5). When returning to the Log in screen, select Thai language (6 ) And enter your email (7) and password (8). Select the checkbox to remember (9) and select the login button (10). The screen below will appear.
2.4 Click the + Add button (11). The equipment dialog will appear as shown below. Then name the device (12) and enter the device number (13), click more options (14), then select the marker (15), which is available in various formats As in the picture below right then click the button (16)
2.5 Wait approximately 10-30 seconds. The online status will be shown and the marker shown in the picture will be shown on the map as shown below. If the device is moving The markers on the map will also move along. But if the online status is not displayed but the status is offline, then the setting in item 1 is incorrect. This may be caused by the port assignment being different from the GPS Tracker model. You will have to go back to check and fix the port to match your GPS Tracker device.
Incidentally, many Chinese GPS Tracker are Clone type. The port specified in the table may not be correct. You can try to change the port number. By using the port number as 5001, 5002, 5006, 5013, 5023, 5036, 5093
Devices that use the TK103 protocol, Port 5002, will send the device's 12-digit number instead of the IMEI number, which usually consists of 11 digits, including 1 leading zeros. For example, if the IMEI number is 123456789012345, the ID number to use is the device number. Which is 056789012345 etc.
3. Tracking devices to always be in the center of the map
Usually, when we press the F5 button to reload the page The program will display the map according to the screen saved in the settings command => User account => Setting options => Save the map position. Which no GPS Tracker device will be selected That means All devices will move freely. With no equipment in the center of the map If we want any GPS Tracker device to always appear in the center of the map Regardless of the position or direction of movement We will have to choose a GPS Tracker device (17) or any other device that needs And make sure that the follow button (18) is in the open state The selected device will always appear in the center of the map.
4. Live route tracking display
To display the live route (21) of any device, we must select the device to display (19) and make sure that the Live route (20) button is in the open state. When the selected device has moved to a new location The trajectory will appear on the device in different locations (21). If you press the F5 button, the Live Live Route (21) will disappear because this Live Live Route (21) is only a temporary travel history. For easy checking of the movement in a short period of time
5. Creating a notification area
5.1 If you want a notification When the mobile device exits or enters a designated area You will need to create an area by drawing a boundary line around the desired area. Which can either use the circle boundary style or use the polygon boundary to draw the border freely. To create a boundary, we use the settings button =>. The area will appear as a dialog box as shown below.
5.2 Click the + Add button (22). The area boundary name dialog (23) will appear. Then click the area button (24). The dialog will appear as shown below.
5.3 Select the tile (25) In order to create a circular boundary, select the circle (26) and click on the map to set the center and radius of the circle area as needed. If you want to create a polygon boundary, select a multi-angle (27) and click on the map in different locations. As required to define the scope Until encircling the boundary, returning to the origin again Make it a closed space As the picture below, then click the button (28) to accept
5.4 When returning to the area dialog, click the button (29). The area name that is created will appear. We can create other territories. Can further If creating the desired amount of space Close the dialog.
At this time, the various regions That has been created does not affect the work with any GPS Tracker device , therefore, we must first determine the area of the GPS Tracker device and must have a notification mode for the device as well. So notification will occur when the GPS Tracker device moves into or moves out of the area assigned to that device Which we can assign the area mode to the device in item 6 as follows
6. Defining areas for equipment
When the area has been created We can select the device that you want to set the zone (30) and then click the settings button (31). Select the area (32). Select the area (33) that you want to apply to the selected device. Which can select only one area or specific area, or choose all areas as needed And then use the same method with other devices Available to all, which at this time we have only set the area for the device only There are no notifications yet, as we have not set any notifications yet. When entering or leaving the area We can specify the notification mode to enter or exit the area in item 7.
7. Defining the access-exit notification mode for devices
7.1 Start creating an alert mode by clicking the Settings button (34) and selecting Notifications (35). The notification dialog will appear. Click the + Add button (36).
7.2 When the notification dialog appears, as shown below, select Enter from the type list bar (37) Click all devices (38) Select the web and mail in the reminder box (39) and click the button (40).
The reason we choose to alert both the web and the email is to send a Beep notification in the browser, either on a computer or on a mobile phone. That opens the web browser to use directly And we have selected the email so that a warning email will be sent to the specified email But even if the mail is selected as well, the system still cannot send the warning email. Until the default setting of sending emails is completed. Therefore, even if the mail is selected, it is not possible to send warning emails to emails Only notifications can be sent through the browser at this time.
7.3 Repeat 7.1 and 7.2 by choosing to exit from the type tab (37) as shown below. And close the notification window.
7.4 Start assigning notifications to the GPS Tracker device by clicking to select the device (41) and selecting the settings button (42). Select the notification (43) and then check all the notifications (44) that you want. And then use the same method with other devices Available to all, which at this time we have already set up a notification mode If there is any movement of the device in or out of the area, the beep will be alerted on the browser, either on the computer or on the mobile phone. And still will not send an email notification immediately Unless we have already set up the default settings for sending emails But at the moment there is only Beep notification sound.
8. To enable / disable the zone display mode for notifications
When a zone has been created to alert the entry or exit of the GPS Tracker device from the area As in the picture below If you want to hide the area from appearing on the map We can click to close the zone button (45) but even though the area is hidden as in the bottom right image. Already But when the device moves in or out of the area Will still have a notification or will always be sent an email unless we cancel the notification from the device first. According to the method of assigning notifications to devices in 7.4, therefore turning on / off of the zone display mode is effective only on the map.
9. Default settings for sending notification messages via email
9.1 Begin to configure the default gmail by clicking the settings button (46) => user accounts (47). The dialog will appear as shown below.
9.2 Click the feature button (48). A dialog will appear. As shown below, click the + Add button (49). The feature dialog will appear. Select the name bar and select Mail: SMTP Host (50). smtp.gmail.com (51)
9.3 Use the same method as 9.2. Add all the names (52) and parameters (53) of the email settings. To appear as the picture below
For Gmail, in addition to the default settings above We should have to create a new account. For sending notification emails only To prevent the notification emails from mixing with other important emails And must be set in the Google Account under Security. With On mode in the Less secure app access section, Gmail can be used to send and receive emails for notifications.
9.4. Testing the default email delivery that we have set. To check that the settings are correct or not by clicking the Test Mail Sending Button (54) on the user account dialog as in the bottom left image. And check the email. If a mail appears showing me the test subject, send an email message and a test message. Send an email message. As shown in the bottom right image All settings in 9.2 and 9.3 are correctly displayed. If email doesn't appear, check 9.2 and 9.3 and Less secure app access in the Google Account.
10. Setting notification when the engine is started and shut down
To use this feature, the GPS Tracker must have ACC Ignition mode and connect the ACC power cable from the GPS Tracker to one of the wiring connections in the Line of the ACC key switch in order to be able to use the mode. Alert When the engine is started or the engine is shut down When making sure the GPS Tracker has been connected correctly. If you want to notify via email Must pass subject 9 before sending notification via email We can set notifications on both the browser and send email notifications as per the following steps.
10.1 Click the Settings button (55) => Notifications (56). The notification dialog will appear. As shown below.
10.2 Click the + Add button (57). The notification dialog will appear as in the picture above. Select Start the engine from the type tab (58). Click on all devices (59). Select the website and mail in the alert box (60) and click the button. (61)
10.3 Repeat as in method 10.2 by choosing to shut down the engine from the type tab (58). The notification dialog will appear as shown below.
10.4 Define the notifications for the GPS Tracker device by clicking to select the device (62) and then selecting the settings button (63). Select the notification (64) and then tick all the notification (65) desired here. Start the engine and shut down the engine And then use the same method with other devices Available to all, which at this time we have already set up a notification mode If the engine is started or the engine is turned off, a beep will sound on the browser, either on the computer or on a mobile phone. And will also have an email notification immediately As we have already set up the default settings for sending emails in step 9.
11. Setting alerts for mobile devices with speeds exceeding the limit
11.1 Click the Settings button (66) => Notifications (67). The notification dialog will appear as shown below.
11.2 Click the + Add button (68). The notification dialog will appear. As shown above, select the speed limit from the type list bar (69). Click on all devices (70). Select the website and mail in the alert box (71) and click. The button (72) will appear as the picture below. 11.2 Click the + Add button (68). The notification dialog will appear. Above picture is selected. Over speed from the type list bar (69). Click on all devices (70). Select the website. And mail in the reminder box (71) and click the button (72). It will appear as the picture below.
11.3 Define the notifications for the GPS Tracker device by clicking to select the device (73) and selecting the settings button (74). Select the notification (75) and then tick all the notifications (76) that you want. Speed limit And then use the same method with other devices Available remaining
11.4 Specify different speed / km. For alarm for each GPS Tracker device. First, select the device (73) and click the edit button (77). The device dialog will appear as shown below.
11.5 On the device dialog, click the feature button (78). The dialog will appear as shown below.
11.6 Click the + Add button (79). The dialog will appear. As shown above, select a speed limit from the name bar (80). Type the speed alert value in The parameter values (81) and click the Save button (82) will appear as the picture below.
11.7 When returning to the device dialog, click the data storage button (83). The notification speed limit for the GPS Tracker device only is completed in 11.3.
11.8 At this time, we have fixed the speed limit mode for one GPS Tracker. If driving or moving at speeds exceeding the limit, a beep will sound on the browser, either on a computer or on a mobile phone. And will also have an email notification immediately As we have already set the default settings for sending emails in Article 9. In addition, this speed limit Will only affect the devices selected in clause 11.3, will not affect the speed limits with other GPS Tracker devices, the speed limits of each device may not be the same, so we have to repeat from clause 11.3 Up to 11.7 with other GPS Tracker devices. If wanting speed limits for alerts
12. Changing the Maps of Maps
Changing a normal map to a satellite map or changing a satellite map to a normal map We use the following command
12.1 Click the Settings button (84) => User accounts (85) as in the picture on the bottom left. Will appear a user account dialog as in the picture on the bottom right
12.2 Select the settings option (86) and then select the map Satellite map (87) and click the save button. In order to exit the dialogue Press the function key F5 to refresh so the satellite map will appear as shown below.
12.3 To change the map back to the original Google map, click the Settings button (84) => User account (85) and select the setting option (86) and select the map. Custom Map (87) and click the Save Data button In order to exit the dialogue Press the function key F5 to refresh so the Google map will appear as in the image below.
13. Recording the extent of the map display on the screen
If you want to show map boundaries often at any point Or at the point where all the devices can be seen at the same time without wasting time minimizing the map or zooming the map or moving the map multiple times. First, adjust the map view to the map view. By zooming in or zooming the map to show the boundary of the area that needs to be shown on the map first Then click the settings button (88) => user accounts (89) as in the picture on the left bottom The user account dialog will appear as the picture on the bottom right. Select the setting option (90) and click the button to save the map location (91). The latitude and longitude values will appear and expand +/- (92) to save for use and then click. Storage button In order to exit the dialog box. Continue every time the F5 function key is pressed to refresh the saved map boundary. Will be restored to appear immediately on the screen.
14. Viewing historical route history (days or weeks or months)
If wanting to check the travel history history of any device Which can view history from more than 3 months by following the steps below
14.1 Click the tab to expand the hidden window at the bottom of the screen. Will appear as the picture above and choose the route (93). Click the Setup button (94). The dialog will appear as the picture below.
14.2 Select the device to display the route history (95). In the case that want to display the route But do not want to show the arrowhead showing the direction of movement Don't tick the checkbox. Show marker (96) In case of wanting to display the entire route And the arrowhead shows the direction of movement Check the box to the checkbox. Show markers (96) and select the time period that you want to display in the period tile (97). We can choose the period 2, 3, 4, 5, 6 days by selecting from the custom options and clicking the data storage button. To exit dialog
14.3 Click the display button (98) to display the route history of the selected time period on the map as shown below.
14.4 To clear the route that appears on the map and clear the coordinates in the window, click the Clear Results (99) button. To send all the data in the table to Microsoft Excel, click the Export button. All to the specified email, click the button to send the report to the email. As specified in Article 9
At this time, we have studied the use of GPS Tracking Server of www.thaigps.net. Comes in detail, covering all basic operations, daily usage has been completed Therefore wish to end this article just as much Thank you all for coming here.
**************************************************** ******
For other models of GPS Tracker, you can check the GPS Tracker's manual to determine which command to use to determine the IP and Port. And you can check the port of the GPS Tracker which port to use. By looking at the information from the table in the link below
1.2 When receiving an SMS message from the device saying "OK", it means that the connection can be successfully set to the server. But is it correct? Must follow item 2 below to add equipment and check first
2.2 Enter the Chrome browser or Internet Explorer or Microsoft Edge and type http://www.thaigps.net:9001
2.3 On the Log in screen, select the registration button (1) and enter your name (2), email (3) and password (4) and click the save file button (5). When returning to the Log in screen, select Thai language (6 ) And enter your email (7) and password (8). Select the checkbox to remember (9) and select the login button (10). The screen below will appear.
2.4 Click the + Add button (11). The equipment dialog will appear as shown below. Then name the device (12) and enter the device number (13), click more options (14), then select the marker (15), which is available in various formats As in the picture below right then click the button (16)
2.5 Wait approximately 10-30 seconds. The online status will be shown and the marker shown in the picture will be shown on the map as shown below. If the device is moving The markers on the map will also move along. But if the online status is not displayed but the status is offline, then the setting in item 1 is incorrect. This may be caused by the port assignment being different from the GPS Tracker model. You will have to go back to check and fix the port to match your GPS Tracker device.
Incidentally, many Chinese GPS Tracker are Clone type. The port specified in the table may not be correct. You can try to change the port number. By using the port number as 5001, 5002, 5006, 5013, 5023, 5036, 5093
Devices that use the TK103 protocol, Port 5002, will send the device's 12-digit number instead of the IMEI number, which usually consists of 11 digits, including 1 leading zeros. For example, if the IMEI number is 123456789012345, the ID number to use is the device number. Which is 056789012345 etc.
5.2 Click the + Add button (22). The area boundary name dialog (23) will appear. Then click the area button (24). The dialog will appear as shown below.
5.3 Select the tile (25) In order to create a circular boundary, select the circle (26) and click on the map to set the center and radius of the circle area as needed. If you want to create a polygon boundary, select a multi-angle (27) and click on the map in different locations. As required to define the scope Until encircling the boundary, returning to the origin again Make it a closed space As the picture below, then click the button (28) to accept
5.4 When returning to the area dialog, click the button (29). The area name that is created will appear. We can create other territories. Can further If creating the desired amount of space Close the dialog.
At this time, the various regions That has been created does not affect the work with any GPS Tracker device , therefore, we must first determine the area of the GPS Tracker device and must have a notification mode for the device as well. So notification will occur when the GPS Tracker device moves into or moves out of the area assigned to that device Which we can assign the area mode to the device in item 6 as follows
7.2 When the notification dialog appears, as shown below, select Enter from the type list bar (37) Click all devices (38) Select the web and mail in the reminder box (39) and click the button (40).
The reason we choose to alert both the web and the email is to send a Beep notification in the browser, either on a computer or on a mobile phone. That opens the web browser to use directly And we have selected the email so that a warning email will be sent to the specified email But even if the mail is selected as well, the system still cannot send the warning email. Until the default setting of sending emails is completed. Therefore, even if the mail is selected, it is not possible to send warning emails to emails Only notifications can be sent through the browser at this time.
7.3 Repeat 7.1 and 7.2 by choosing to exit from the type tab (37) as shown below. And close the notification window.
7.4 Start assigning notifications to the GPS Tracker device by clicking to select the device (41) and selecting the settings button (42). Select the notification (43) and then check all the notifications (44) that you want. And then use the same method with other devices Available to all, which at this time we have already set up a notification mode If there is any movement of the device in or out of the area, the beep will be alerted on the browser, either on the computer or on the mobile phone. And still will not send an email notification immediately Unless we have already set up the default settings for sending emails But at the moment there is only Beep notification sound.
9.2 Click the feature button (48). A dialog will appear. As shown below, click the + Add button (49). The feature dialog will appear. Select the name bar and select Mail: SMTP Host (50). smtp.gmail.com (51)
9.3 Use the same method as 9.2. Add all the names (52) and parameters (53) of the email settings. To appear as the picture below
For Gmail, in addition to the default settings above We should have to create a new account. For sending notification emails only To prevent the notification emails from mixing with other important emails And must be set in the Google Account under Security. With On mode in the Less secure app access section, Gmail can be used to send and receive emails for notifications.
9.4. Testing the default email delivery that we have set. To check that the settings are correct or not by clicking the Test Mail Sending Button (54) on the user account dialog as in the bottom left image. And check the email. If a mail appears showing me the test subject, send an email message and a test message. Send an email message. As shown in the bottom right image All settings in 9.2 and 9.3 are correctly displayed. If email doesn't appear, check 9.2 and 9.3 and Less secure app access in the Google Account.
10.2 Click the + Add button (57). The notification dialog will appear as in the picture above. Select Start the engine from the type tab (58). Click on all devices (59). Select the website and mail in the alert box (60) and click the button. (61)
10.3 Repeat as in method 10.2 by choosing to shut down the engine from the type tab (58). The notification dialog will appear as shown below.
10.4 Define the notifications for the GPS Tracker device by clicking to select the device (62) and then selecting the settings button (63). Select the notification (64) and then tick all the notification (65) desired here. Start the engine and shut down the engine And then use the same method with other devices Available to all, which at this time we have already set up a notification mode If the engine is started or the engine is turned off, a beep will sound on the browser, either on the computer or on a mobile phone. And will also have an email notification immediately As we have already set up the default settings for sending emails in step 9.
11.2 Click the + Add button (68). The notification dialog will appear. As shown above, select the speed limit from the type list bar (69). Click on all devices (70). Select the website and mail in the alert box (71) and click. The button (72) will appear as the picture below. 11.2 Click the + Add button (68). The notification dialog will appear. Above picture is selected. Over speed from the type list bar (69). Click on all devices (70). Select the website. And mail in the reminder box (71) and click the button (72). It will appear as the picture below.
11.3 Define the notifications for the GPS Tracker device by clicking to select the device (73) and selecting the settings button (74). Select the notification (75) and then tick all the notifications (76) that you want. Speed limit And then use the same method with other devices Available remaining
11.4 Specify different speed / km. For alarm for each GPS Tracker device. First, select the device (73) and click the edit button (77). The device dialog will appear as shown below.
11.5 On the device dialog, click the feature button (78). The dialog will appear as shown below.
11.6 Click the + Add button (79). The dialog will appear. As shown above, select a speed limit from the name bar (80). Type the speed alert value in The parameter values (81) and click the Save button (82) will appear as the picture below.
11.7 When returning to the device dialog, click the data storage button (83). The notification speed limit for the GPS Tracker device only is completed in 11.3.
11.8 At this time, we have fixed the speed limit mode for one GPS Tracker. If driving or moving at speeds exceeding the limit, a beep will sound on the browser, either on a computer or on a mobile phone. And will also have an email notification immediately As we have already set the default settings for sending emails in Article 9. In addition, this speed limit Will only affect the devices selected in clause 11.3, will not affect the speed limits with other GPS Tracker devices, the speed limits of each device may not be the same, so we have to repeat from clause 11.3 Up to 11.7 with other GPS Tracker devices. If wanting speed limits for alerts
12.2 Select the settings option (86) and then select the map Satellite map (87) and click the save button. In order to exit the dialogue Press the function key F5 to refresh so the satellite map will appear as shown below.
12.3 To change the map back to the original Google map, click the Settings button (84) => User account (85) and select the setting option (86) and select the map. Custom Map (87) and click the Save Data button In order to exit the dialogue Press the function key F5 to refresh so the Google map will appear as in the image below.
14.1 Click the tab to expand the hidden window at the bottom of the screen. Will appear as the picture above and choose the route (93). Click the Setup button (94). The dialog will appear as the picture below.
14.2 Select the device to display the route history (95). In the case that want to display the route But do not want to show the arrowhead showing the direction of movement Don't tick the checkbox. Show marker (96) In case of wanting to display the entire route And the arrowhead shows the direction of movement Check the box to the checkbox. Show markers (96) and select the time period that you want to display in the period tile (97). We can choose the period 2, 3, 4, 5, 6 days by selecting from the custom options and clicking the data storage button. To exit dialog
14.3 Click the display button (98) to display the route history of the selected time period on the map as shown below.
14.4 To clear the route that appears on the map and clear the coordinates in the window, click the Clear Results (99) button. To send all the data in the table to Microsoft Excel, click the Export button. All to the specified email, click the button to send the report to the email. As specified in Article 9
At this time, we have studied the use of GPS Tracking Server of www.thaigps.net. Comes in detail, covering all basic operations, daily usage has been completed Therefore wish to end this article just as much Thank you all for coming here.
**************************************************** ******
